Application with brush and spatula
Apply with a brush (or spalter). Immerse the brush directly into the material and apply it to one spot on the wall and from that spot, using short (8-14 cm) brush-strokes, move it in all directions. Continue to repeat the same operation until you reach the end of the wall, taking care to cover the entire surface, but leaving more material in some areas and less in other areas.
As soon as the product begins to dry (after 18-20 minutes), it can be gone over with the appropriate flexible plastic spatula, exerting light pressure.
After 5 or 6 hours (at 20 ° C), you can repeat the operation. And after applying the product again, wait about 60 minutes, then go over it with the appropriate plastic or flexible steel spatula moving in all directions with long movements of about 18-20 cm., compressing the colored particles.
Brush application
Apply by brush or spalter. Immerse the brush directly into the material and apply it to one place on the wall and from there, use short (8-14 cm) brush-strokes, moving it in all directions. Continue repeating the same operation until the wall ends, taking care to cover the entire surface, but leaving more material in some areas and less in others. After 5 or 6 hours (at 20o C), you can repeat the operation and after applying the product wait for about 60 minutes. Then with a dry brush, go over the entire surface moving in all directions with long movements of about 18-20 cm, compressing the colored particles slightly.
Application by trowel
Apply with a small, metal trowel using 20-30 cm strokes, crisscrossing in all directions. After 5 or 6 hours, repeat the operation and after about 60 minutes, when the drying is about to begin, compress the surface with a metal or light, plastic spatula making strokes in all directions, compressing the small colored particles.
Wash the tools with water
